![]() Install time would then be on average around 60 minutes. How long does it take to install? This may vary depending on how much cleaning is needed on your upper coupler plate.Always check to see your trailer is secure before leaving. We do recommend following the install instructions accordingly, and following proper attaching and detaching instructions when connecting your trailer. According to the SAE J700 guidelines, even with installing our ¼” thick Trailer Slick Plate – your kingpin should still fall into the 3.2 to 3.4” guideline. Will this cause any coupling issues when connecting my trailer to the hitch? None that we’ve found, typically kingpins are long enough anyways.Will drilling of holes into my upper coupler plate on my trailer void any warranty? Please contact your trailer warranty guide on this, most of the warranties we researched are not limited to such a case, best to check first however.This is why we include extra hardware in the event this may occur. Install Torx screw per instructions procedure and move on to the next hole. Countersink the hole with a standard 82 degree countersink bit. Drill a 5/16” hole in the Trailer Slick Plate next to the broken screw hole. What happens if one of these Torx bolts breaks during install? This may occur especially on hardened upper coupler plates.Once your larger hole has been drilled, using the provided Torx bolt, you will screw the fasteners in. Do you have to tap your holes for the install? No the bolts are self-taping, we recommend starting with a smaller pilot hole, then moving to a larger drill bit.**Note you will actually have extra mounting Torx bolts included with your hardware in the event a bolt break should occur. Does the Trailer Slick Plate come with the hardware to install? Yes, all mounting hardware is included with your Trailer Slick Plate.What recommended tools will I need to install the Minimizer Trailer Slick Plate? To install your Trailer Slick Plate, you will need the following: Marker, screwdriver, center punch or centering tool, drill with 1/8”, 17/64” and 9/32” (optional drill bits, Loctite, Impact driver.Installation instructions, including drill size and recommended tools will be noted. The Trailer Slick Plate itself comes with recessed mounting holes to be used as a guide. Does the Slick Plate require any install? Yes, you will have to drill approximately 13 to 19 holes (depending on plate size) into your trailer upper coupler plate.What is the weight of your Trailer Slick Plate? Plate weights will vary depending on size, but none of them will weigh more than 14 lbs.Please reference our Trailer Slick Plate flyer to find your part#. What sizes of Trailer Slick Plates do you offer? Sizes vary the plates are designed to fit a specific upper coupler plate.What is the warranty on the Trailer Slick Plate? 5 Year Warranty.What colors are the Trailer Slick Plates available in? White Only.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |